Diseño de un generador mareomotriz para abastecer de energía eléctrica el Muelle de San José – Chiclayo

dc.contributor.advisorVillanueva Zapata, Jorge Albertoes_PE
dc.contributor.authorDelgado Santos, Kenji Jack
dc.coverage.spatialChiclayoes_PE
dc.creatorDelgado Santos, Kenji Jack
dc.date.accessioned2025-06-09T19:35:20Z
dc.date.available2025-10-16T07:30:05Z
dc.date.embargoEnd2027-06-09
dc.date.issued2025
dc.description.abstractEsta investigación tiene como objetivo crear un diseño de una turbina mareomotriz de una potencia suficiente para cubrir la máxima demanda del muelle de San José. Es aquí donde se realizó primero el cálculo de máxima demanda de dicho muelle, después se realizó la determinación del potencial energético del litoral marino del muelle de San José, posteriormente se calculó las características técnicas y funcionales de los diferentes componentes del generador, para luego proceder a realizar propiamente el diseño del generador eléctrico mediante el software SolidWorks, en el cual, se realizó un análisis estático que permita determinar la funcionalidad y la resistencia del material a utilizar. Finalmente se realiza un análisis económico para determinar la factibilidad de la implementación de dicho diseño. Se obtiene como resultados una demanda máxima de suministro eléctrico en el muelle de San José de 16.5 Kw, que será cubierta por la potencia generada de 17.08 Kw. con el diseño del generador mareomotriz.es_PE
dc.description.abstractThis research aims to create a design for a tidal turbine of sufficient power to cover the maximum demand of the San José pier. It is here where the calculation of the maximum demand of said pier was first carried out, then the determination of the energy potential of the marine coast of the San José pier was carried out, later the technical and functional characteristics of the different components of the generator were calculated, to then proceed to properly carry out the design of the electric generator through the SolidWorks software, in which a static and frequency analysis was carried out to determine the functionality and resistance of the material to be used, Finally, an economic analysis is carried out to determine the feasibility of the implementation of said design. As a result, a maximum demand for electricity supply at the San José pier of 16.5 Kw is obtained, which will be covered by the generated power of 17.08 Kw. with the design of the tidal generator.es_PE
dc.formatapplication/pdfes_PE
dc.identifier.citationK. J. Delgado Santos. "Análisis y propuesta de mejora en empresa de confección de pantalones utilizando herramientas de ingeniería industrial," tesis de licenciatura, Fac. de Ingeniería, Univ. USAT, Chiclayo, Perú, 2023. [En línea]. Disponible en:es_PE
dc.identifier.otherRTU008299
dc.identifier.urihttp://hdl.handle.net/20.500.12423/8651
dc.language.isospaes_PE
dc.publisherUniversidad Católica Santo Toribio de Mogrovejoes_PE
dc.publisher.countryPEes_PE
dc.rightshttps://purl.org/coar/access_right/c_f1cfes_PE
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/es_PE
dc.subjectEnergía mareomotrizes_PE
dc.subjectEnergía eléctricaes_PE
dc.subjectIngenieríaes_PE
dc.subjectTidal energyes_PE
dc.subjectElectric poweres_PE
dc.subjectEngineeringes_PE
dc.subject.ocdehttps://purl.org/pe-repo/ocde/ford#2.02.00es_PE
dc.titleDiseño de un generador mareomotriz para abastecer de energía eléctrica el Muelle de San José – Chiclayoes_PE
dc.typehttp://purl.org/coar/resource_type/c_7a1fes_PE
renati.advisor.dni17537456
renati.advisor.orcidhttps://orcid.org/0000-0002-2529-1161es_PE
renati.author.dni75151229
renati.discipline713076es_PE
renati.jurorGonzales Bazán, Luis Albertoes_PE
renati.jurorVillalobos Cabrera, Jonyes_PE
renati.jurorVillanueva Zapata, Jorge Albertoes_PE
renati.levelhttps://purl.org/pe-repo/renati/level#tituloProfesionales_PE
renati.typehttps://purl.org/pe-repo/renati/type#tesises_PE
thesis.degree.disciplineIngeniería Mecánica Eléctricaes_PE
thesis.degree.grantorUniversidad Católica Santo Toribio de Mogrovejo. Facultad de Ingenieríaes_PE
thesis.degree.nameIngeniero Mecánico Eléctricoes_PE
usat.lineaDesarrollo e innovación tecnológicaes_PE

Archivos

Bloque de licencias

Mostrando 1 - 1 de 1
No hay miniatura disponible
Nombre:
license.txt
Tamaño:
1.67 KB
Formato:
Item-specific license agreed upon to submission
Descripción: